Angle joints create movement
Angle joints/Ball joints serve as linking and guiding elements
for movable parts and create corner joints. These parts from
component suppliers can significantly simplify mechanical
construction, be used to transfer power in offset axles, transmit
movement and are indispensable in all mechanical operations such as
cushioning, drawing, tilting, levering, etc. But that is not all.
Housings, ball studs and Co. are as various in their geometry,
appearance and construction as the ideas of the designers.
There are standard parts in every possible size, construction and
material composition available for most applications. As one of the
leading German specialist for linking elements, mbo Osswald always
keeps a large number of angle joints out of his product palette of
more than 12,000 parts in stock. In addition to the DIN 71802 angle
joints which consist of DIN 71805 housings and DIN 71803 ball studs,
every possible variation is ready to be called up by the customer.
There is also a choice of surface protection such as, for example,
blank, galvanised zinc, steel or stainless steel versions.
For problematic environmental conditions (dust, lubricants) there
are special angle joints with sealing caps available. The space
between housing and ball stud is enclosed and sealed with a cap -
the best protection against damage caused by environmental
influences. The programme is extended with axial joints.
mbo Osswald has also specialised in the individual manufacture of
special parts. These concern every possible characteristic such as
geometry, material and surface quality of the individual products.
Every enquiry will immediately be checked for feasibility. The
customer's requirements will either be fulfilled exactly or
alternatives will be offered which come nearest to them. These
individually manufactured parts offer every user the possibility of
directly influencing the sequence of machining and set new quality
and manufacturing standards himself. |